The synchronous belt wheel will wear out after being used for a long time, and the phenomenon of shaking and sliding will often occur during long-term operation. If the timing pulley is not checked regularly, it will cause damage to the machine for a long time, and it may be directly damaged in severe cases. Therefore, in our daily use, we should check the timing belt wheel regularly. Then the iHF combined gear tells you what aspects should be paid attention to in the daily maintenance of synchronous pulley?

Timing belt wheel daily maintenance of these three aspects:

1. Surface of synchronous belt wheel: All standard belt pulleys can be weighted according to the standard. If there is no bump mark on the surface of the synchronous belt wheel, this is the phenomenon that we should observe whether the enterprise has jitter in the operation and management process of the synchronous belt wheel. If there is a jitter phenomenon, it is necessary to be able to replace the synchronous belt wheel in time.

2. The belt of the timing pulley: The timing pulley is driven by the belt, so we also need to check the belt regularly. After installation, first observe the tightness of the belt. If the installation is too tight, it will affect the speed of the synchronous pulley, and the motor shaft will be worn in severe cases. If the installation is too loose, the efficiency of the machine may be reduced and slippage may occur. If the belt is aging and the tension is insufficient, we need to replace the belt in time.

3. Timing pulley mounting hole: The direct contact between the timing pulley mounting hole and the motor shaft is an important part of determining whether the machine can run. We need to regularly observe whether the mounting holes are clean and free of impurities. Because impurities may damage the mounting hole, if the mounting hole is damaged, the timing pulley will not be used.