In the long-term use of the taper sleeve wear is an inevitable problem, so we have no way to reduce wear and prolong the service life of the pulley? Here is a brief introduction to the daily maintenance of the pulley how to do:

1. Check the cleanness of the keyway and installation hole: the taper sleeve is a vulnerable part. After long-term operation, the inner hole and keyway may be damaged. Check before each assembly, and replace the defects in time. We need to regularly clean the inner hole of the pulley with gasoline. After cleaning with gasoline, wipe the inner hole clean, and then drop a little lubricating oil.

2. Surface anti-rust treatment: The standard pulley surface is smooth and uniform in color. If there is rust, it will affect the rotation of the pulley, and the phenomenon of pulley shaking can be checked. What do you do with the rust? Clean the surface with gasoline and non-woven cotton cloth, and then apply a layer of anti-rust oil.

Boyang reminds you that you should always check the taper sleeve of the pulley and do a good job in daily maintenance, which can save a lot of wear and replacement costs! Usually you have to pay more attention! Doing a good job in the daily maintenance of the pulley can effectively avoid the damage to the entire equipment caused by the pulley running failure, which cannot be ignored!!

The source of the article is Boyang, please indicate the reprint!