With the rapid progress of industrial technology, automated production has been developed, making the efficiency of enterprises more and more high. However, with the gradual liberation of employee labor, the frequency of use of mechanical transmission is increasing, and the demand for transmission hardware such as pulleys is also increasing. However, the long-term use of the pulley is lossy. The daily inspection of the transmission equipment should be done, and the common phenomena of the equipment should be properly handled, such as damage to the equipment and heating of the pulley. What are the effects and causes of the pulley fever? Let's take a look.

the impact of 1. pulley heating:

After the pulley works for a long time, part of the mechanical energy is converted into heat energy, which causes the pulley to heat up. The heating of the pulley will reduce the working efficiency of the machine, accelerate the aging of the pulley, and the pulley is easy to break, thus causing safety problems.

2. pulley fever three reasons:

1, pulley material: the choice of pulley to choose the matching material according to the mechanical running speed. Many customers in the choice of pulley when the material workmanship requirements are very vague, resulting in the pulley can not keep up with the speed of the machine, so there is a hot hand, wear is also more serious, so we choose the pulley when the pulley material requirements, choose to meet the equipment requirements of the pulley.

2. Pulley selection: The choice of pulley model needs to be confirmed according to the equipment speed, power, etc. The wrong choice of pulley model will lead to insufficient torque and cannot carry the load of the machine, because many customers have a vague concept of pulley selection. Although it is sometimes too large or too small, it may be usable, but various problems will occur over time.

3. Pulley balance: When the pulley rotates, there is a beating phenomenon. Generally, the pulley does not have a dynamic balance relationship. Dynamic balance has a great influence on the use and life of the pulley. If the dynamic balance is done, it can ensure the accurate transmission without sliding.

Boyang reminds: it is normal for the pulley to heat up during the operation of the equipment, but it is also necessary to keep it within the normal range. If it is particularly high, it is necessary to do a good job in cooling the equipment and let the equipment shut down and have a rest. Also check the tightness of the belt regularly, and the pulley should be maintained on time. This will not only avoid problems with the pulley during operation, but also increase the service life of the pulley!

The source of the article is Boyang transmission, please indicate!